e-mark for Electrical/electronic sub-assemblies
Effective from 2002/10/1, Automotive Directive 95/54/EC applies to components (electrical/electronic subassemblies: ESA) and separate technical units which are intended for installations in vehicles. Issued in the OJ on 2004/11/13, 2004/104/EC replaces the Automotive Directive 95/54/EC and from 2006/01/01additional immunity (transient) testing became mandatory.
Please refer to the chart below for compliance management.
Together with TÜV SÜD Automotive, TÜV SÜD Japan provides quick and smooth service to type approvals of e-mark. The Automotive EMC Directive 2004/104/EC requires the following testing for EMC aspects.
1. Radiated emission (Broadband, narrowband noise, 30MHz to 1GHz)
2. Immunity test (20MHz to 1GHz): either radiated immunity or conducted immunity)
TÜV SÜD Japan will help you complete both emission and immunity tests in Japan. This will reduce your burden to send samples abroad.
Summary of services:
- All tests will be conducted in Japan according to the Automotive EMC Directive 2004/104/EC for type approval (e-mark)
- You can seek for advise on Directives and testing required for compliance
- There is no burden of translation - all communications with the respective authorities will be done through TÜV SÜD Japan
- Speedy testing (one to two days) and approvals (2 to 3 weeks)
- Approval number can be applied in advance
And moreˇÄ
With our TÜV SÜD Automotive Group, type approvals for car alarm systems are also readily available at TÜV SÜD Japan.